Ammonia Production From Seawater and Air by a New Method that Utilizes Renewable and Waste Energy
ISEF · 2022 Energy: Sustainable Materials and Design
Overview
In line with recent increasing interest in renewable energy solutions, ammonia (NH3) has been attracting attention as an energy carrier. However, environmental conditions often affect current renewable energy sources and are thus unsuitable for conventional NH3 production methods. Additionally, when hydrogen is used to produce NH3 via conventional methods, carbon dioxide (CO2) is generated. To overcome these problems, we developed an NH3 production method from air and seawater using renewable energy. In this research, NH3 was generated simply by venting N2 gas into a thick Na+ solution. Based on the analysis, we found microbubbles generated by creating high surface tension at the gas-liquid interface during aeration generate N•, H•, and metal Na from N2, water, and Na+, respectively, and the metal Na catalyzes the N• and H• reactions to generate NH3. When verifying this method, we discovered NH3 generation was optimized under the following three solution conditions: 1) >1 mol/L, 2) >343 K, and 3) pH 5–7. Based on these points, equipment using renewable energy and waste heat to produce NH3 by the following three processes was fabricated. I. Air was used as the N2 source, and aeration was performed by a pump powered by solar or wind energy. II. Concentrated seawater was used as an electrolyte solution, and the water temperature was maintained using solar and waste heat. III. The pH level was adjusted with CO2. Using this equipment, manufacturing costs equivalent to the Haber-Bosch process were achieved, and CO2 was fixed as sodium bicarbonate.
Competition history
- ISEF 2022
Resources
Related projects
ISEF · 2023
Novel Ammonia Production Method Using Both Microbubbles and Iron Electrodes for Seawater Electrolysis
ISEF · 2026
Renewable Ammonia Electrochemical Synthesis by Glow Discharge With an Iron Based Catalyst
ISEF · 2025
Developing a Hydrazine Seawater-based Hydrogen Production System Using a Highly Efficient Pd-Ni(OH)2 Catalyst
ISEF · 2026
Design and Evaluation of an Energy-Efficient CO2 Capture System Utilizing Sodium Hydroxide for Ammonium Bicarbonate Fertilizer Synthesis
ISEF · 2022
Controlling Combustion Conditions of Ammonia for Eco-Friendly Energy
ISEF · 2024
Applying Magnetic Fields and Lewis Acids for a Highly Efficient and Cost-Effective Hydrogen Production From Seawater
ISEF · 2015
Novel Low Grade Waste Heat Recovery System with Simultaneous Electricity Generation, Carbon Sequestration and Urea Production
ISEF · 2017
Novel Low-Temperature Carbon Capture Using Aqueous Ammonia and Organic Solvents
Closest projects by meaning, across every fair and year in the corpus.
Browse more like this
Source: Regeneron International Science and Engineering Fair