Electronics & Electromagnetics
Objectives/Goals To determine what the direction of the lines of force would be if you could get inside an electromagnet with a north pole on the left end and a south pole on the right end.…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals My objective is to show how the aerodynamics of a racecar and an airfoil mounted upside down affects the down-force of the car. Methods/Materials The materials that were use…
Physics & Astronomy
Fourth Award
Objectives/Goals The goal of this projects was to construct a Spectral Energy Distribution (SED) diagram of blazar S5 0716+714 using images from the Spitzer Space Telescope, ground based opt…
Physics & Astronomy
Objectives/Goals My objective was to find out the effect of albedo as it relates to global warming. Methods/Materials Experiment 1 1) 6 354 ml plastic bowls (not white) 2) 6 pool thermometer…
Electronics & Electromagnetics
Objectives/Goals Our objective in this project was to learn about electricity, circuits, and the physics behind them. We accomplished it by building a line following robot and testing the li…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals I play club volleyball and wanted to see how using an old volleyball vs. a new one, would affect play. I narrowed my question to "How does the roughness of a volleyball affe…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Second Award
Objectives/Goals Viscosity is a fundamental property of fluids. The goals were to determine alt classifications of viscosity for representative fluids and to experimentally measure the visco…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Fourth Award
Objectives/Goals This experiment shows the relationship between the spin of a thrown ball & the movement of that ball off a straight-line path. Methods/Materials A double-wheeled baseball-pi…
Electronics & Electromagnetics
Objectives/Goals My objective was to test if a hydrogen oxygen proton exchange membrane (PEM) fuel cell is more energy efficient than a rechargeable chemical battery. Methods/Materials The m…
Physics & Astronomy
Objectives/Goals To determine the success of the Bohr model of the atom predicting the emission spectrum produced by atoms of various elements and to find an empirical value for the Rydberg…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals I wanted to find out what type of car design has the least amount of drag. Methods/Materials Materials: A lot of wood, Plexiglas wall or board, Cardboard, Sand paper, Sponge…
Electronics & Electromagnetics
Fourth Award
Objectives/Goals My goal was to determine if common household items can be combined to produce and store enough energy to power small electronic devices. Also, to compare the results of the…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Honorable_mention Award
Objectives/Goals The objective of my experiment was to find out how the number of blades and the angle of blades effects the amount of electricity a wind generator produces. Methods/Material…
Physics & Astronomy
Honorable_mention Award
Objectives/Goals Our experiment was conducted for the purpose of determining which angle of a projectile launcher will achieve the greatest distance. We derived a mathematical formula to cal…
Electronics & Electromagnetics
Objectives/Goals To detarmine which amateur radio antenna has the most directional radiation pattern, in terms of field strength. I believe that the yagi antenna will be the most directional…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals An experiment was conducted to determine which rear car spoiler angle will be the most efficient in speed and traction. Methods/Materials Wind was blown from an electric blo…
Physics & Astronomy
Objectives/Goals The objective of this project was to figure out whether a CD disk could act as a spectrometer and distinguish different light sources. Methods/Materials A CD disk was placed…
Physics & Astronomy
Objectives/Goals This project will demonstrate the affects of centripetal force has on an object and the effects that Newton#s three laws on motions has on an object moving in a circular mot…
Electronics & Electromagnetics
Objectives/Goals The objective of our project was to develop an indicator system to help bikers signal their turns and stops without having to take their hands off the handlebars. Methods/Ma…
Physics & Astronomy
Objectives/Goals To run an experiment in order to determine the caloric content and stored energy of a variety of peanuts by using a calorimeter and an equation, so that we can compare our o…
Electronics & Electromagnetics
Honorable_mention Award
Objectives/Goals The Gauss Accelerator, commonly known as the Gauss or Coil Gun, demonstrates potential for future use in military and space applications. However, efficiency is miniscule du…
Electronics & Electromagnetics
Objectives/Goals Our goal was to find out whether CO2 affected how much electricity a photovoltaic cell produced. We hypothesized that when surrounded by CO2, the cell would produce more ele…
Physics & Astronomy
Fourth Award
Objectives/Goals Since water refracts more than air, and water is denser than air, it would appear that denser substances generally refract more. Is this always true? My hypothesis is that d…
Physics & Astronomy
Objectives/Goals The experiment "Do different frequencies of light contain different amounts of energy?" was conducted to discover whether higher frequencies of visible light, such as blue l…
Physics & Astronomy
Objectives/Goals I propose that if members of a drumline practice in an enclosed area without ear protection, then individual drumline members are put at a high risk of hearing damage. Metho…
Electronics & Electromagnetics
Objectives/Goals My problem statement is, #How do different colors of light affect the electrical output of a photovoltaic cell?#. My hypothesis was if green light would shine on a photovolt…
Electronics & Electromagnetics
Objectives/Goals The purpose of this experiment was to determine if rare earth magnets would cause an electric motor to spin faster than conventional magnets. Methods/Materials To build the…
Electronics & Electromagnetics
Objectives/Goals The purpose of this experiment was to find out if the angle and the color of the wavelength affected the amount of electricity produced by a solar panel. Methods/Materials W…
Physics & Astronomy
Third Award
Objectives/Goals The paper characterizes the behavior of localized surface plasmon polariton (LSPP) propagation on two-dimensional metal nanoparticle arrays. As excitations of surface electr…
Electronics & Electromagnetics
Objectives/Goals My objective is to improve a wireless internet signal and access the internet more easily by building a parabolic reflector antenna to extend the range of the signal. Method…