Value Added Sensors from Environmental and Industrial Waste
ISEF · 2019 Environmental Engineering Third Award
Overview
Solid waste is a huge problem in Qatar, it is produced as a rate of 2.5 Kg/day Out of this, polymers and carbon black constitute a significant percentage of it. This project aimed at synthesizing conductive polymer composites (CPC) force sensors utilizing two constitutes mentioned above. It is hoped that this approach will both help address the problem of waste and produce an economically and technically feasible sensor. The sensor was synthesized from a composite of two constituents: a filler material made of carbon black (CB) and a matrix material made of the polyethylene polymer (PP). Using CB as a filler to enhance electric conductivity and thermal stability. The filler material was formed using Ultrasonication method, and the electrodes were produced by applying conductive silver paste on both sides of the sensor. The work proceeded to test the effect of various CB concentrations on two parameters; thermal stability and electrical conductivity. Homogeneity and morphology of the mixture were established using scanning electronic microscope images, and the wettability was ascertained using the Digi-drop instrument. Tests showed that electrical conductivity increased with increasing concentration of CB. However, thermal stability increases initially with concentration and then stabilizes at the higher range. The better filler-matrix interaction and filler dispersion, observed under the SEM, is the underlying reason behind improved properties. Various important relations were derived and studied, and the significant sensing property of PP/CB composite was established. We strongly believe that the product is an inexpensive and technically feasible sensor derived from recycled waste.
Awards (2)
- Third Award of $1,000 $1,000
- NASA: Honorable Mention
Competition history
- ISEF 2019
Resources
Related projects
ISEF · 2014
Fabrication of Flexible Pressure Sensors Using MWCNTs Nanocomposites Material
ISEF · 2019
An E-Waste Management Initiative for Developing Countries: Using Acrylonitrile Butadiene Styrene, High Impact Polystyrene, Polypropylene, Polyvinyl Chloride, Rubber and Aluminosilicate Glass to Make a Composite Material
ISEF · 2017
A Composite Material Made from Wastes of Glass, Polymers and Industrial Rubber as a Waste Management Initiative in Urban and Sub-Urban Areas in Kenya
ISEF · 2020
Usage of Conductive Materials to Reduce Pressure Sensor Cost
Closest projects by meaning, across every fair and year in the corpus.
Source: Regeneron International Science and Engineering Fair