The Effect of Wind on Bridges

Overview

Objectives/Goals To determine the effect of wind on different bridge structures. Methods/Materials I built four bridges; one bridge with no sides, one bridge with solid sides, one bridge with 17% of material removed from its# sides and one bridge with 30% of side material removed. I also built a wind tunnel where I tested all my bridges three times. I tested the bridges under wind speeds of low, medium, and high. The bridges were allowed to turn on an axis and the angle they turned was measured in degrees. I also tested the bridges horizontal motion under the same wind speeds. I measured this movement in millimeters. Results The bridge with no sides rotated the least, but the bridge with 30% of its side material removed from its sides rotated just a little less. The bridge with 17% of its side material removed turned more than the bridge with 30% of the side material removed but less than the bridge with solid sides, which turned the most. I threw out the data for the horizontal motion tests because the results were invalid. Conclusions/Discussion I have concluded that the surface area of the side of a bridge makes a big difference in wind resistance. The more surface area there is for the wind to hit, the more force is put on the bridge. This has to be taken into consideration when engineers design a bridge.

Competition history

• CSEF 2004 Aerodynamics/ Hydrodynamics · Entry J0112

Resources

• CSEF project summary ↗

Related projects

Closest projects by meaning, across every fair and year in the corpus.

Browse more like this

• All Physics and Astronomy projects
• CSEF Physics and Astronomy projects
• Every CSEF 2004 project