Magnetorheological Fluid
CSEF · 2008 Applied Mechanics & Structures
Overview
Objectives/Goals My objective was to find which tubing size and MR fluid mixture caused the greatest difference in force under different magnetic fields. In particular, how the iron particle size and amount of iron particle versus oil and grease combination affected force due to change in fluid viscosity. Methods/Materials The experiment was conducted using a fixture consisting of two syringes connected by tubing. Different MR fluid mixture was pushed through different size tubing to explore fluid characteristics under flow mode of operation. Permanent magnets were used to provide magnetic field. MR fluid mixture consisted of different size iron particles, light oil, and white lithium grease. Digital pull gage was used to measure the force. The syringe piston was moved slowly to keep the fluid flow speed constant for each test trial run. Results The results showed that the smallest (0.06 in) diameter tubing and mixture 3( smallest iron particle size and highest percentage of iron powder) performed the best. The largest 0.5 in diameter tubing and Mixture 1(larger iron particles) combination performed the worst with little difference in force under different magnetic fields. Conclusions/Discussion The mixture 3 with the highest percentage (71.5% iron particle, 26.2% oil, 2.4% grease) of smallest iron particles (35micron) moving through the tubing under different magnetic fields created highest difference in force under different magnetic fields. The small iron particles made significant difference in performance by reducing flow friction. It also allowed higher percentage of iron in the mixture to cause noticeable increase in viscosity under magnetic field. Mixture 3 opened up the possibility to explore force variation under different flow speeds. It is deduced from this experiment that further reduction in iron particle size would improve the performance.
Summary statement
Using different size tubing and MR fluid mixtures, I tested the force required to move the mixture through the tubing under different magnetic fields.
Help received
Father helped gather materials for project.
Competition history
- CSEF 2008
Resources
Related projects
CSEF · 2011
Effect of Material Composition on Shear Strength Yield Point of Magnetorheological Fluids
ISEF · 2020
The Strength Analysis of Altered Magnetorheological Fluids Compared to Industrial Types in Silicone Oil Based Carrier Fluids Induced via a Magnetic Flux
CSEF · 2008
Adjustable Damper for Shock Absorbers
CSEF · 2016
Experimenting with Ferrofluid's Magnetic Properties: Searching for Novel Applications
ISEF · 2025
Developing Emulsion Additives to Optimize Rheological Behavior in Non-Aqueous Magnetorheological Smart Fluids
JSHS · 2025
Developing Emulsion Additives to Optimize Rheological Behavior in Non-Aqueous Magnetorheological Smart Fluids
CSEF · 2013
Magnetic Flow
CSEF · 2009
The Effect of a Magnetic Field and Applied Voltage on the Rotation of a Fluid Induced by a Lorentz Body Force
Closest projects by meaning, across every fair and year in the corpus.
Browse more like this
Source: California Science & Engineering Fair public projects