Half-Life! Spectroscopic Study of the Kinetics of Decontamination Reactions using New Programmable Colorimeter
CSEF · 2009 Chemistry First Award
Overview
Objectives/Goals This project analyzes chemical reactions of decontamination using spectroscopy to determine kinetic parameters. Synthetic organic dyes are the model contaminants, as they are widely used, often toxic, and resist biodegradation. Objectives: (1) Build a programmable Colorimeter to measure change in concentration, (2) Determine the rate law, reaction order and half-life of the reaction of dyes with hypochlorite. It is hypothesized that the reaction is 1st order in dye and in hypochlorite. Methods/Materials Solutions of known concentration of synthetic dyes in distilled water are prepared using a 200g x 0.01g balance, 1mL/3mL/10mL pipettes, 10mL/25mL/100mL graduated cylinders, and test tubes. A Colorimeter is designed and programmed to take measurements near the dye's wavelength of maximum absorbance. Calibration curves are obtained. The reaction of dye and hypochlorite is begun and temperature noted. The control is a dye solution alone. The method of isolation and method of initial rates are used to find reaction orders for dye and hypochlorite, respectively. Data is mathematically analyzed to find the rate law and half-life. Results Dye solutions were found to follow the Beer-Lambert Law within certain ranges (e.g. Methylene Blue (MB) range extended up to about 7.82x10^-5 mol/L). Reaction rates were quite slow for some dyes (e.g. for MB, the half-life was 1777 sec. at 24C). Analysis showed a 1st order dependence on concentration of both MB and hypochlorite, which supported the hypothesis. Results for other dyes & reactions are also tabulated. Conclusions/Discussion The Colorimeter was successfully built and tested; it is programmable and extensible. The hypothesis was partially supported; Eosin-Y (EY) data showed interesting anomalies. After further research into its spectroscopic properties, an explanation is proposed. Kinetics is important for industrial productivity and the environment. Applications of decontamination range from wastewater remediation to toxic chemical agent neutralization.
Summary statement
The rate law and half-life of decontamination reactions are determined using spectroscopic analysis by a colorimeter which I designed and programmed.
Help received
Thanks to my teacher Mr. Doe for clarifying concepts. Mr. Reinking introduced me to robotics & programming. Dad supervised my experiments & helped with soldering. Mom & Sister took pictures and gave suggestions for board layout.
Awards (1)
Competition history
- CSEF 2009
Resources
Related projects
CSEF · 2013
Sunlight Assisted Water Remedial: The Photocatalytic Removal of the Toxic Organic Dye Rhodamine B from Wastewater
CSEF · 2009
Color Me Blue!
CSEF · 2007
The Effects of Monochromatic Radiation on the Decomposition Rate of H(2)O(2)
CSEF · 2009
Catalytic Decomposition of Hydrogen Peroxide: Kinetics, Mechanism, and Applications
CSEF · 2017
Photocatalytic Degradation of Dyes Using Metal Oxides In the Presence of UV Light
CSEF · 2018
A Green, Low-Cost Solution for the Removal and Recovery of Dye from Industrial Wastewater (A Second Year Study)
CSEF · 2016
The Effect of Visible Light Irradiation on Photocatalyst Mediated Decolorization of Crystal Violet in Wastewater
CSEF · 2018
The Efficacy of a Silver-Zinc Oxide Nanocomposite under Varying Light Wavelengths in Photocatalytic Degradation
Closest projects by meaning, across every fair and year in the corpus.
Browse more like this
Source: California Science & Engineering Fair public projects