Development of a Less Expensive Method for Radon Measurements
ISEF · 2017 Environmental Engineering Fourth Award
Overview
The project consists in the elaboration of a measurer of radon gas through the conditioning of a Geiger-Müller counter, with the purpose of making a portable, less expensive and more precise prototype that gives immediate data for the equipment to be universal, i. e., being capable of using it in any place of the world at a low cost and giving useful results. As well as the detection of radon in my school. The development of the equipment consists mainly in a Polyvinyl Chloride structure, better known as PVC, that counts with the radiation detector in its interior, in this case the Geiger-Müller counter, an activated carbon packaged bed, and a data output, in order to facilitate readings directly on the computer. The prototype of this project was compared with a calibrated thermoluminescence dosimeter, having a linear correlation coefficient of 0.9997 in the radiation measurements inside the educational institution, which demonstrate the equipment efficiency. At the same time, it is worth mentioning the radon values obtained, where the maximum was 202.9 Bq / m3, which exceeds what is recommended by the World Health Organization, so another objective of the project is to raise awareness among the general population about the hazards that can cause being in a closed environment with high amounts of this harmful gas.
Awards (1)
- Fourth Award of $500 $500
Competition history
- ISEF 2017
Resources
Related projects
ISEF · 2018
Affordable Web-Enabled Continuous Radon Detector
CWSF · 2026
SMART-RADON: A Self-Monitoring Adaptive Real Time System for Indoor Radon Reduction.
ISEF · 2015
Measurement of Radon Emanation and Its Correlation with Indoor Radon Levels in Some Areas of Mallow
ISEF · 2026
From the Impact of Radon to Forecasting: the Different Shades of Environmental Radioactivity
ISEF · 2023
Experiments to Determine Radon Levels in Household Water and Measure the Effectiveness of Mitigation Options
CWSF · 2026
Signal Through the Noise: Improving Radon Readings with a Kalman Filter
ISEF · 2024
Leveraging Electrochemistry and Light Scattering to Improve Air Quality Detection
ISEF · 2022
Creation of a Portable Device for Environmental Measurements Using a 3D Printing Design
Closest projects by meaning, across every fair and year in the corpus.
Browse more like this
Source: Regeneron International Science and Engineering Fair