Air Bubble Breakwater

Overview

Objectives/Goals All harbors have a stone breakwater to stop waves, thus preventing costly erosion. But these breakwaters are difficult and expensive to construct. My project tests whether air bubbles can be used as a sufficient breakwater, to effectively diminish the height of waves. Methods/Materials I built a tank about eight feet long and filled it with water. The side was made of Plexiglas for accurate wave measurement. I hooked an air compressor to the tank to release the air bubbles at the bottom of the tank. The bubbles were released at intervals of 20, 40, 60, and 80 PSI. I measured the height of ten waves before and after the wave reached the air bubbles. Results The results were as follows: at 20 PSI, wave height was decreased .9 cm on average. At 40 PSI, wave height was decreased by 2.1 cm on average. At 60 PSI, wave height was decreased by 2.6 cm, and at 80 PSI, wave height was decreased by 3.1 cm. Conclusions/Discussion Because the wave height was decreased by 62% at 80 PSI, I came to the conclusion that air bubbles can be used as a sufficient breakwater.

Awards (1)

• Second Place

Competition history

• CSEF 2008 Earth & Planetary Sciences · Entry J0701

Resources

• CSEF project summary ↗

Related projects

Closest projects by meaning, across every fair and year in the corpus.

Browse more like this

• All Earth and Environmental Sciences projects
• CSEF Earth and Environmental Sciences projects
• Every CSEF 2008 project
• CSEF Second Place winners