Alternative Energy (Junior Division Only)
Objectives/Goals The purpose of this project was to find a way to keep the efficiency of silicon solar panels by keeping it cool and at the same time to use the unused part of the spectrum o…
Earth & Planetary Sciences
Honorable_mention Award
Objectives/Goals The purpose of this experiment was to evaluate the relationship between shear-wave velocity and density of different geologic materials at various critical structures, and h…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals The objective of this experiment was to investigate the sensitivities of different geometries and surface textures to the amount of aerodynamic drag produced. It was hypothe…
Applied Mechanics & Structures
Objectives/Goals These experiments were completed to test which club head angle performed the best, resulting in a better trajectory and farther distance. The club head of a golf club is the…
Zoology
Objectives/Goals I studied the effect of heat on Eisenia Fetida (also know as redworms) to find the temperature in which they reproduce best in. I predicted that Ensenia Fetida would reprodu…
Mathematics & Software
Objectives/Goals The interactions between cars in traffic are not just attributed to parameters such as the distance to the car in front; they are affected by the behavior of the drivers. So…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals My project was to determine if Bernoulli's equation of lift can accurately predict lift by measuring the speed under and over the wing as I change the angle of attack to cla…
Environmental Science
Objectives/Goals My science project is to determine if low tire pressure will lead to more rolling resistance which means an increase in fuel comsumption and contributing more pollution to t…
Microbiology (General)
Objectives/Goals The goal of this project was to determine if there is a correlation between microbial death and metallic conductivity. This is to extend published research demonstrating ant…
Cognitive Science (Junior Division Only)
Objectives/Goals The objective of this experiment was to measure the effect of monocular vision versus binocular vision on optical illusion perception. The hypothesis was that if the subject…
Pharmacology/ Toxicology
Objectives/Goals The objective of this experiment was to find a safe, natural substance that would successfully repel pavement ants. Because many people are burdened by these pests, an eco-f…
Microbiology (General)
Objectives/Goals The purpose of my investigation is to study the influence of ocean acidification on growth rates of phytoplankton in Santa Monica seawater through in-situ incubation. Method…
Plant Biology
Objectives/Goals To determine the effect of plant density on plant growth. Methods/Materials Compass or other sharp tool 12 plastic pots masking tape permanent marker potting soil, enough fo…
Plant Biology
Objectives/Goals The objective of my project was to determine whether the speed in which you rotate a seed affects the direction it will grow. I believe that the constantly spun seed will gr…
Cognitive Science (Junior Division Only)
Honorable_mention Award
Objectives/Goals The objective of this experiment is to determine the effects of screen background color on computer users' reaction times. I hypothesized that when a green background is dis…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Honorable_mention Award
Objectives/Goals The objective was to determine the effect of parachute shape on its descending speed. Methods/Materials First, I gathered my materials and found a good spot to drop my parac…
Biochemistry/ Molecular Biology
Objectives/Goals The goal of my project was to enhance the thermal stability of an enzyme involved in breaking down cellulose so as to increase the efficiency of converting plant biomass int…
Environmental Science
Objectives/Goals The objective of this experiment was to analyze the effects of the size and structure of various chlorine compounds on their ability to adsorb to sand. Methods/Materials The…
Chemistry
Objectives/Goals The objective was to determine if temperature affects the ascorbic concentration of orange juices, and if there is an effect, what temperature affects it most and least? Met…
Biochemistry/ Molecular Biology
Objectives/Goals The objective of this experiment was to determine the effect of the concentration level of an enzyme called beta-glucosidase on the amount of p-Nitrophenol produced, which i…
Zoology
Honorable_mention Award
Objectives/Goals The objective of my project was to determine whether the removal of the rhopalia, the sensory organ of the Aurelia Aurita, affects or even controls the organism#s regenerati…
Biochemistry/ Molecular Biology
Objectives/Goals My objective was to determine the rate of DNA degradation when exposed to Ultraviolet light. Methods/Materials Different samples of lambda DNA was exposed to different time…
Environmental Science
Objectives/Goals This purpose was to find a way to increase the rate that bacteria bio-remediate an area polluted with gasoline. Oil spills put 37 million gallons of oil in the ocean each ye…
Microbiology (General)
Objectives/Goals Is UV-A light powerful enough to kill bacteria in normal lake water? If so, is the UV-A killing the bacteria, or is some other source? Methods/Materials I used agar to measu…
Alternative Energy (Junior Division Only)
Objectives/Goals 1) Build 14 home-made dye-sensitized nano-crystalline solar cells and test their output using natural dyes of different colors. 2) Hypotheses: a) Green, as the most prevalen…
Chemistry
Objectives/Goals My goal was to determine the effect of various light sources on the rate of and Iodine to Iodide photochemical reaction. Methods/Materials Reference solutions were made with…
Environmental Science
Methods/Materials â#¢ About 2 kg of Brush Ash â#¢ About 2 kg of Wood Ash â#¢ One Fire pit to create ash â#¢ One Oven â#¢ 2 large Pyrex casserole pans â#¢ 27 ZiplocA# 500 mL containers â#¢ On…
Biochemistry/ Molecular Biology
Objectives/Goals My objective was to discover the effects of caffeine on a regenerating planarian, my replacement for a growing child. I also wanted to know the dosage of caffeine that would…
Mammalian Biology
Objectives/Goals The objective was to learn if people of varying ages and genders produce muscle force differently, by using measures of muscle sound. Methods/Materials Subject 1 was instruc…
Applied Mechanics & Structures
Objectives/Goals The goal of my project was to determine how the weight of an airsoft bb affects how it flies. I believe that the heavier bbs will fall more than lighter ones in equal distan…