Electricity & Electronics
Objectives/Goals The purpose of this project was to develop a low cost compact flash X-ray source that would produce high energy, extremely short x-ray pulses for the study of high speed phe…
Electricity & Electronics
Objectives/Goals Our objective is to determine the effect of tilting a photovoltaic solar panel in order to maximize its output power for designing an efficient solar energy system. Methods/…
Aerodynamics/ Hydrodynamics
Objectives/Goals Measure and compare the effect of wind drag at three different speeds on model cars with three different shapes. In addition, to design a wind tunnel which would be able to…
Electricity & Electronics
Objectives/Goals The purpose of my experiment was to build a small dynamometer that could measure the output power, torque, and RPM of a HO scale slot car. Methods/Materials I researched dyn…
Electricity & Electronics
Objectives/Goals The objective of my project is to minimize the effects of reflected GPS multipath signals on an autonomous mobile vehicle. Alice was the name of the autonomous vehicle team…
Aerodynamics/ Hydrodynamics
Objectives/Goals Determine if adding weight and moving it along the fuselage will change an airplane's flight distance and stall height. Methods/Materials METHODS: Prepare test area without…
Physics & Astronomy
Objectives/Goals The object of this experiment was to observe the phases of the Moon and Venus and to determine if the planets revolve around the Earth or the Sun. Methods/Materials I observ…
Aerodynamics/ Hydrodynamics
Objectives/Goals The experiment is "How will the shape of a car effect its speed down a straightaway track" and "How will the addition of a spoiler on the back of the car effect its speed do…
Aerodynamics/ Hydrodynamics
Objectives/Goals Phase 1 determined the best configuration for transporting space aircraft by using larger planes. Attaching the small ship on the bottom of the large ship, facing forward, r…
Aerodynamics/ Hydrodynamics
Objectives/Goals This experiment tested whether using the RockSim method to calculate the center of pressure (CP) in conjunction with the generally accepted #rule# that the CP must be at lea…
Electricity & Electronics
Objectives/Goals My objective was to find out if robots could follow lines better with more than one light sensor when the it is faced with an unknown or changing background lighting. I hypo…
Electricity & Electronics
Objectives/Goals The objective of the project was to conduct research and laboratory experimentation to study photo voltaic cells and their practical applications. Methods/Materials Experime…
Electricity & Electronics
Objectives/Goals Our purpose was to investigate the efficiency of Stirling Engines and Photovoltaic Cells in harnessing solar energy. Methods/Materials We used a compass to orient our projec…
Physics & Astronomy
Objectives/Goals I wish to measure the optical activity of various sugars and artificial sweeteners, both in their pure form and in food products. I would like to find out the similarities a…
Aerodynamics/ Hydrodynamics
Objectives/Goals The objective of the experiment was to know which variables such as mass and propeller pitch create an efficient air propulsion system on land. The experiment was to find a…
Aerodynamics/ Hydrodynamics
Objectives/Goals To show that by increasing the pitch of a propeller it will generate more thrust, while at the same time less RPM, and draw more power. Methods/Materials I used four differe…
Physics & Astronomy
Objectives/Goals Skyglow caused by excess light from urban centers obscures the visibility of stars and is an increasing problem for astronomical observations. This experiment determines whe…
Electricity & Electronics
Objectives/Goals My main objective for my project was to find whether or not it was possible for me to create a new way to generate energy from the power of waves, and if it could be cost co…
Aerodynamics/ Hydrodynamics
Objectives/Goals My objective is to learn if rockets with larger or smaller fins fly the highest and are the most stable. Methods/Materials The materials I used were: Balsa Wood, 8 Viking Ro…
Electricity & Electronics
Objectives/Goals My objective is to understand the operation of Light Emitting Diodes (LED) and determine if modern LEDs have the advantages to replace incandescent light bulbs for energy-sa…
Physics & Astronomy
Objectives/Goals To determine the effects of liquid temperature on the density of the liquid and the buoyancy of an object in the liquid. Methods/Materials Four different liquids: tap water,…
Physics & Astronomy
Objectives/Goals The order of the liquids from lowest viscosity to highest viscosity will be olive oil, motor oil, and corn syrup; the viscosity of a liquid is inversely proportional to its…
Physics & Astronomy
Objectives/Goals Our project was to determine the spectra line colors that were produced by noble gases. In addition, it was to determine what wavelengths each spectrum tube created. We beli…
Electricity & Electronics
Objectives/Goals The objective of this project is to find the most efficient speed at which to run a Light Electric Vehicle(LEV). This would be the speed at which the batteries have the leas…
Aerodynamics/ Hydrodynamics
Objectives/Goals The objective of my project is to determine which liquid, corn syrup or glycerin, is the most viscous. I also want to see how temperature affects the viscosity of these liqu…
Aerodynamics/ Hydrodynamics
Objectives/Goals Our question was: How do the different dimensions of rectangular streamers all with the same area affect how long it takes for the rocket to fall? We thought that if a strea…
Electricity & Electronics
Objectives/Goals My Science Fair project is about switching types of light bulbs to save energy and money. The question is "Do you really save money by switching from an incandescent to a fl…
Aerodynamics/ Hydrodynamics
Objectives/Goals The goal of my project was to determine through controlled experiments if it is more aerodynamically efficient to drive with the tailgate down, tailgate up, or with no tailg…
Aerodynamics/ Hydrodynamics
Objectives/Goals I designed this experiment to test the static thrust of three designs of 8x4 model aircraft propellers (figure 1) and determine if there is a difference Methods/Materials Ma…
Electricity & Electronics
Objectives/Goals The purpose of this experiment was to determine the effect of circular directional waveguide antennas of varying volume on the signal-to-noise ratio (SNR) of a wireless netw…