Electronics & Electromagnetics
Second Award
Objectives/Goals The goal of this project was to design a prototype induction heating system utilizing a digital control loop implemented on a FPGA. This would replace the analog phase-locke…
Electronics & Electromagnetics
Objectives/Goals Through our project, we wanted to measure the effectiveness of increasing the number of iterations of a fractal in a fractal antenna and the wireless signal reception streng…
Electronics & Electromagnetics
Objectives/Goals The goal of this experiment was to determine if it is possible to create a macro-scale (as opposed to nano-scale) device that exhibits memristive behavior using table-top ma…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals To determine which factor of a wind turbine blade is responsible for effiency, surface area or the shape of the blade. I tested eight different shaped blades that had equal…
Electronics & Electromagnetics
Honorable_mention Award
Objectives/Goals Create a sophisticated, yet low-cost, mobile robot platform with various sensors to survey hazardous environments. The robot is to be controlled from a remote distance. All…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals This science fair project determined the best mainsail design for racing, cruising, and racer-cruiser sailboats. I experimented with three sail designs: the Marconi sail (sh…
Electronics & Electromagnetics
Objectives/Goals The objective was to determine if changing the amount of time the holographic plate and object are exposed to the laser impacts the clarity of the holographic image. Methods…
Electronics & Electromagnetics
Fourth Award
Objectives/Goals Computers are expensive. It would be good to have computers that are affordable for everyone. Two methods to make them more affordable are to use less expensive, non-compute…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals I'm testing whether changing the angle of an airfoil/wing affects the lift (or downward force) generated by air flowing over and under the airfoil/wing. Methods/Materials My…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals Problem - Safebottles.co.nz has reported that more than 100 million plastic water bottles end up in landfills and waterways worldwide each day # that is approximately 1500 e…
Physics & Astronomy
Objectives/Goals My project was designed to determine how a modulated voltage supply at a constant low current would affect the rate of deflection of charged particles by an electromagnet. T…
Physics & Astronomy
Objectives/Goals My question, as stated above, was chosen because I had seen my dad pop balloons with lasers before, and I thought it would be a great base for a science fair project. I wond…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals The purpose of my project was to find out if and how elevation affects the break of a curveball. I predict that a curveball thrown at higher elevation will travel farther an…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals How do the sail angle, sail width, and the wind speed affect the force on a sail? Our hypothesis is that the largest sail at the highest wind speed will produce the greatest…
Physics & Astronomy
Objectives/Goals Objective is to determine correlations between the index of refraction (IOR) and density and chemistry. The initial hypothesis was that denser liquids will have higher IORs…
Electronics & Electromagnetics
First Award
Objectives/Goals This study examined the effect of insulating and conductive cylindrical tubes on induced eddy currents caused by movements of magnets. Methods/Materials The experiment compa…
Physics & Astronomy
Objectives/Goals The objective of this experiment was to investigate the new and developing studies of UVA radiation protection. The goal for this experiment is to promote educational study…
Physics & Astronomy
Fourth Award
Objectives/Goals My objective was to determine scientifically if percussing a watermelon predicts how sweet or ripe it is. I hypothesized that ripe watermelons transmitted a different sound…
Physics & Astronomy
Objectives/Goals To determine the effect of air temperature on the flight distance of a fueled film canister. Methods/Materials Two blocks of wood were screwed together with one cut at a 45…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals The goal for this project was to find out if golf ball dimpling on the top surface of delta wing glider can increase its aerodynamics efficiency to a point which affects mea…
Physics & Astronomy
First Award
Objectives/Goals Under applied electric current, interconnects in integrated circuits are known to fail when lack of resistance to electromigration causes directional diffusion and the forma…
Physics & Astronomy
Objectives/Goals The purpose of this project was to figure out whether lasers might be used to transfer energy efficiently. Specifically, to measure the efficiency when power is converted in…
Electronics & Electromagnetics
Objectives/Goals My project was to prove or disprove if the material a levitating train is built with affect its rate of speed. I believe the material a levitating train is built with affect…
Physics & Astronomy
Objectives/Goals How does adding mass change the period of a spring? My hypothesis was the more weight added to a mass-spring system will increase the length of the period of the spring#s ha…
Physics & Astronomy
Objectives/Goals To create a rapid inference classification system by correlating transit curvature to mass and orbital radius of exoplanets. The rapid inference classification system provid…
Electronics & Electromagnetics
Honorable_mention Award
Objectives/Goals The objective is to determine if a maximum efficiency exists in an magnetic air conditioning apparatus that utilizes the magnetocaloric effect to produce a temperature chang…
Physics & Astronomy
Honorable_mention Award
Objectives/Goals Today four stroke gasoline engines control our transportation. These engines are polluting the environment and run on a limited fuel. I've proved before that HHO added to th…
Physics & Astronomy
Third Award
Objectives/Goals The Fitzhugh Nagumo Model is widely used to understand the behavior of neurons and other excitable systems, which are nonlinear oscillators with a distinct threshold and dyn…
Physics & Astronomy
Objectives/Goals The objective of my experiment was to determine which direction a house faces will absorb the most heat from the sun and record the highest temperature. Methods/Materials Fo…
Physics & Astronomy
Objectives/Goals To see if expensive sunscreens with high SPFS are better than inexpensive sunscreens with low SPFs. Methods/Materials Materials: Different brands of sunscreen, Saran wrap, 2…