Aerodynamics/ Hydrodynamics (Junior Division Only)
Fourth Award
Objectives/Goals This experiment shows the relationship between the spin of a thrown ball & the movement of that ball off a straight-line path. Methods/Materials A double-wheeled baseball-pi…
Electronics & Electromagnetics
Objectives/Goals My objective was to test if a hydrogen oxygen proton exchange membrane (PEM) fuel cell is more energy efficient than a rechargeable chemical battery. Methods/Materials The m…
Physics & Astronomy
Objectives/Goals To determine the success of the Bohr model of the atom predicting the emission spectrum produced by atoms of various elements and to find an empirical value for the Rydberg…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals I wanted to find out what type of car design has the least amount of drag. Methods/Materials Materials: A lot of wood, Plexiglas wall or board, Cardboard, Sand paper, Sponge…
Electronics & Electromagnetics
Fourth Award
Objectives/Goals My goal was to determine if common household items can be combined to produce and store enough energy to power small electronic devices. Also, to compare the results of the…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Honorable_mention Award
Objectives/Goals The objective of my experiment was to find out how the number of blades and the angle of blades effects the amount of electricity a wind generator produces. Methods/Material…
Physics & Astronomy
Honorable_mention Award
Objectives/Goals Our experiment was conducted for the purpose of determining which angle of a projectile launcher will achieve the greatest distance. We derived a mathematical formula to cal…
Electronics & Electromagnetics
Objectives/Goals To detarmine which amateur radio antenna has the most directional radiation pattern, in terms of field strength. I believe that the yagi antenna will be the most directional…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals An experiment was conducted to determine which rear car spoiler angle will be the most efficient in speed and traction. Methods/Materials Wind was blown from an electric blo…
Physics & Astronomy
Objectives/Goals The objective of this project was to figure out whether a CD disk could act as a spectrometer and distinguish different light sources. Methods/Materials A CD disk was placed…
Physics & Astronomy
Objectives/Goals This project will demonstrate the affects of centripetal force has on an object and the effects that Newton#s three laws on motions has on an object moving in a circular mot…
Electronics & Electromagnetics
Objectives/Goals The objective of our project was to develop an indicator system to help bikers signal their turns and stops without having to take their hands off the handlebars. Methods/Ma…
Physics & Astronomy
Objectives/Goals To run an experiment in order to determine the caloric content and stored energy of a variety of peanuts by using a calorimeter and an equation, so that we can compare our o…
Electronics & Electromagnetics
Honorable_mention Award
Objectives/Goals The Gauss Accelerator, commonly known as the Gauss or Coil Gun, demonstrates potential for future use in military and space applications. However, efficiency is miniscule du…
Electronics & Electromagnetics
Objectives/Goals Our goal was to find out whether CO2 affected how much electricity a photovoltaic cell produced. We hypothesized that when surrounded by CO2, the cell would produce more ele…
Physics & Astronomy
Fourth Award
Objectives/Goals Since water refracts more than air, and water is denser than air, it would appear that denser substances generally refract more. Is this always true? My hypothesis is that d…
Physics & Astronomy
Objectives/Goals The experiment "Do different frequencies of light contain different amounts of energy?" was conducted to discover whether higher frequencies of visible light, such as blue l…
Physics & Astronomy
Objectives/Goals I propose that if members of a drumline practice in an enclosed area without ear protection, then individual drumline members are put at a high risk of hearing damage. Metho…
Electronics & Electromagnetics
Objectives/Goals My problem statement is, #How do different colors of light affect the electrical output of a photovoltaic cell?#. My hypothesis was if green light would shine on a photovolt…
Electronics & Electromagnetics
Objectives/Goals The purpose of this experiment was to determine if rare earth magnets would cause an electric motor to spin faster than conventional magnets. Methods/Materials To build the…
Electronics & Electromagnetics
Objectives/Goals The purpose of this experiment was to find out if the angle and the color of the wavelength affected the amount of electricity produced by a solar panel. Methods/Materials W…
Physics & Astronomy
Third Award
Objectives/Goals The paper characterizes the behavior of localized surface plasmon polariton (LSPP) propagation on two-dimensional metal nanoparticle arrays. As excitations of surface electr…
Electronics & Electromagnetics
Objectives/Goals My objective is to improve a wireless internet signal and access the internet more easily by building a parabolic reflector antenna to extend the range of the signal. Method…
Physics & Astronomy
Objectives/Goals In last year's project, I measured the 60 Hz magnetic field emissions from various appliances found in my home. The strength of these emissions was found, in many instances,…
Physics & Astronomy
Objectives/Goals The objective of this project was to determine the effect of temperature on the sound of musical instruments. Methods/Materials The musical instruments used included a quart…
Electronics & Electromagnetics
Objectives/Goals The objective of my project is to test how does the power output of a photo voltaic cell is effected by change in temperature. My hypothesis is that, higher the temperature…
Electronics & Electromagnetics
Third Award
Objectives/Goals Our objective was to build a propulsion system using electromagnets to drive the magnetic-levitation train car that we built for last year's science fair. Methods/Materials…
Electronics & Electromagnetics
Objectives/Goals I wanted to know whether the size of the iron core (1 nail, 2 nails, and 3 nails), the thickness of the wire (20-gauge, 22-gauge, and 26-gauge), or the number of coils (10 c…
Electronics & Electromagnetics
Objectives/Goals My goal was to create enough energy to charge a car battery utilizing the Seebeck effect. Methods/Materials I used copper and steel wire, ice water and a stove to produce el…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals Determine how different shaped holes with the same area effect flow rate. I think overall, the water will flow through the circles the fastest because they have no sharp cor…