Aerodynamics/ Hydrodynamics (Junior Division Only)
Fourth Award
Objectives/Goals The objective was to determine how changing the size of ellipsoids along one axis changes the speed at which they fall through liquids of varying viscosity and how the non-s…
Electronics & Electromagnetics
Objectives/Goals The objective of this project was to come up with a solution that will help prevent electronic or other personal items being washed in a washing machine. I came up with this…
Electronics & Electromagnetics
Objectives/Goals My project is to determine if perpetual motion can be achieved by using the repelling sides of magnets. I believe that perpetual motion can be achieved when stationary magne…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals I tested a model of a horizontal-axis wind turbine and models of vertical-axis Savonius,Darrieus,and Giromill wind turbines to see which device rotates faster to collect mor…
Physics & Astronomy
Objectives/Goals My goal is to determine the effect of pressure and temperature on the volume of air. I hypothesize that higher temperatures and lower pressure increase the volume of air not…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals The objective of my project was to build a hovercraft, to determine if different surfaces affect how much weight it will hold and how well it will hover, and to have fun. Me…
Electronics & Electromagnetics
Objectives/Goals My objective was to determine what affect air molecules and gravity have on a Maglev train as the trains' mass increases. I believe that a Maglev train will travel 5 cm when…
Physics & Astronomy
Objectives/Goals The main concept in MHD is the interplay between an electric field and magnetic field. Both act on a moving conductive fluid and cause it to rotate by creating an creating a…
Electronics & Electromagnetics
Objectives/Goals This experiment explored the question: "What is the effect of distance in millimeters (mm) between two inductively coupled windings on the current in milliamperes (mA) induc…
Electronics & Electromagnetics
Objectives/Goals My main goal of this project was to see if Overclocking a computer was a theoretical speed gain, or an actual speed gain. Another piece of information I wanted to find out w…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals My objective was to determine what level of water would cause a 2-liter bottle rocket to reach its highest altitude. I believe that a 2-liter water bottle rocket will reach…
Electronics & Electromagnetics
Objectives/Goals To find out if spacing wire wraps on an electromagnet strengthens or weakens the electromagnet. Methods/Materials 12 inch iron nail; Insulated copper wire; 6-volt battery; D…
Electronics & Electromagnetics
Objectives/Goals My experiment seeks to answer the question whether passenger electronic equipment affects aircraft navigational instruments or not. I hypothesize that if passenger electroni…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals The goal of this project is to find the most efficient way to build a windmill.The different areas of investigation are the blade length, blade angle, and gear ratio.My hypo…
Electronics & Electromagnetics
Honorable_mention Award
Objectives/Goals My project was to see if static electricity could be stored in a Leyden jar capacitor made out of common household materials, and if so, can the charge held inside the Leyde…
Physics & Astronomy
Objectives/Goals Which notes on a piano can induce sympathetic vibrations on an open string? Mathematical relationships between test note and open string frequencies will be used to predict…
Physics & Astronomy
Objectives/Goals The purpose of my science project was to see if the density of different metals has a correlation with their thermal conductivity. Methods/Materials To test my experiment, I…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals We wanted to determine which class of paper airplanes, Darts, or Gliders, performs better. We predicted that darts would fly farther, because their streamlined design is mor…
Electronics & Electromagnetics
Objectives/Goals The objective of this project is to determine if the cost of converting category 5 cable (running 10 100 switch) to category 6 cable(gigabit switch) correlates to the amount…
Physics & Astronomy
Objectives/Goals A magnet's magnetic field is affected by a change in temperature. My hypothesis for this project was that the magnet with the lowest Curie point would be affected by tempera…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals The goal of this project was to investigate the effect of turbine blade size on power produced by a micro-hydro water turbine. I hypothesized that the smallest blade size wo…
Electronics & Electromagnetics
Honorable_mention Award
Objectives/Goals Litter is a big problem in today's world. In addition to its unappealing look, litter may actually harm animals and pollute the environment. Unfortunately, there are not rea…
Electronics & Electromagnetics
Objectives/Goals To find which type of DTV antenna works the best. Methods/Materials Compound bowtie antenna, Telephone wire antenna, Loop antenna, Single bowtie antenna, Can antenna, Analog…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Honorable_mention Award
Objectives/Goals The purpose of this experiment was to determine which of four airfoil designs would generate the greatest lift. Airfoil One was the most similarly shaped to common aircraft…
Physics & Astronomy
Objectives/Goals My objective to to discover which set of violin strings will create the purest tone. I will test three different sets of strings, each set is a different diameter to try and…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals The purpose of this project is to determine how propeller pitch affects the thrust and speed of an underwater motor. The blade angle, defined by pitch, of an underwater prop…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals My family and I were driving through the desert and I saw a windmill farm. I noticed that all the windmills had three blades. I wondered why there were not more blades on a…
Aerodynamics/ Hydrodynamics (Junior Division Only)
Objectives/Goals Today we are running out of Fossil Fuels. The environment is being harmed and we need another green source of energy. One of these sources of energy is a wind turbine. A win…
Physics & Astronomy
First Award
Objectives/Goals Of the three factors that stop a guitar string from vibrating, air resistance, absorption by the guitar, and absorption by the strings, the purpose of my experiment is to de…
Electronics & Electromagnetics
First Award
Objectives/Goals My project was to determine how changing the operating frequency of a tesla coil used as a radio transmitter will affect its ability to transmit energy wirelessly to light u…