38,465 real projects from ISEF, the Canada-Wide Science Fair, JSHS, AJAS, the Calgary Youth Science Fair and the California Science & Engineering Fair — searchable by meaning, and filterable by fair, year, category and award.
CSEF · 2006
Chemistry
Objectives/Goals My purpose was to discover if foods with higher fat content had more calories in them. Mainly, I wanted to carry out an experiment that had to do with something we use every…
CSEF · 2006
Chemistry
Objectives/Goals The objective is to determine weather the colorful, imported slate we have from India which has an oily metallic residue, will have any harmful or negative effects on our fr…
CSEF · 2006
Chemistry
Objectives/Goals Introduction: Veggie cars are good to drive because they run on the renewable resource - vegetable oil. My motivation for this project was to see which oil is the best for a…
CSEF · 2006
Chemistry
Objectives/Goals My science fair project was to put different substances into different cups or tap water, and to see which one evaporated the fastest. I thought it would be a good idea beca…
CSEF · 2006
Chemistry
Objectives/Goals The objective is to determine which combination of ingredients results in the pancake with the lowest density. Methods/Materials Four experiments were performed. In three of…
CSEF · 2006
Chemistry
Objectives/Goals For my science project I wanted to determine which fireplace fuels work most efficiantly to heat a room for the least amount of time, energy, and money. Methods/Materials Fo…
CSEF · 2006
Chemistry
Objectives/Goals The goal of this project was to spectrophotometrically determine how much food coloring is in soda pop and Kool-Aid. Methods/Materials A Cary 5E spectrophotometer was used t…
CSEF · 2006
Chemistry
Objectives/Goals 1) Identify which structural features of quinoline-based antimalarials prevent heme polymerization (therefore killing the malaria parasite Plasmodium with free heme inside t…
CSEF · 2006
Chemistry
Objectives/Goals My objective was to learn to make soap using different types of fats; I assumed that the solidity of the type of fat used would determine the density of the finished soap. M…
CSEF · 2006
Chemistry
Objectives/Goals I wanted to find out if I could influence ordinary tap water to make the surface tension change, and if it did, how it would change. I tried it by adding salt, oil, detergen…
CSEF · 2006
Chemistry
Objectives/Goals My project was seeing how different Acids affect a pennies mass; this was done in order to verify the impact of acid rain. Methods/Materials Pennies were put in water (contr…
CSEF · 2006
Chemistry
Objectives/Goals To find out which type of detergent will weaken the fabric and cause the fabric to he point that it can't turn back to it's normal size. the other reason is to find out whic…
CSEF · 2006
Chemistry
Objectives/Goals My project is to determine which water type will dissolve bar soap at the fastest rate. Methods/Materials Four plastic containers were set-up and labeled for specific water…
CSEF · 2006
Chemistry
Objectives/Goals The objective is to determine whether or not the Brita Water Filter makes significant improvements in the pH, total hardness, total dissolved solids, free chlorine, total ch…
CSEF · 2006
Chemistry
Objectives/Goals I studied electrolysis hoping to find a green method of making the hydrogen necessary for running hydrogen fuel cell vehicles. My objective was to find a favorable voltage a…
CSEF · 2006
Chemistry
Objectives/Goals I hypothesized that silica (SiO2) molecules, or quartz, found in common beach sand, could be separated to create pure silicon (Si), a key material in computer processors. An…
CSEF · 2006
Chemistry
Objectives/Goals My project is based on the chemical reaction that is created when mixing acids (vinegar) and bases (baking soda) to create gas. After measuring the amount of gas produced by…
CSEF · 2006
Chemistry
Objectives/Goals The objective for this project is to maximize hydrogen production using a high output hydrogen production unit. Methods/Materials Methods include testining the electrodes, a…
CSEF · 2006
Chemistry
Objectives/Goals The objective was to find out which milk - whole, reduced fat, or fat free - had the highest protein level and determine if the process of skimming does indeed collect all o…
CSEF · 2006
Chemistry
Objectives/Goals Which type of metal is the most resistant to vinegar: copper, aluminum, or steel? Methods/Materials Materials: The few materials I used were: 1. Bowls 2. Vinegar 3. Differen…
CSEF · 2006
Chemistry
Objectives/Goals This project is designed to test the relative amounts of vitamin C (ascorbic acid) in different samples of orange juice. I used an iodine indicator solution to test qualitat…
CSEF · 2006
Chemistry
Objectives/Goals The experimental objective is to determine the optimal chromatography conditions for separating flavanoids in blackberries so that spectral analyses and an antioxidant activ…
CSEF · 2006
Chemistry
Objectives/Goals The object is to find out if vitamin C in orange juice is affected more by the oxygen in the air if the juice is covered or uncovered. Methods/Materials Tested amount of vit…
CSEF · 2006
Chemistry
Objectives/Goals The objective was to simulate gastric acid corrosion of different coins, and to assess the differences in chemical reactions and extent of corrosion (evaluated by weight los…
CSEF · 2006
Chemistry
Objectives/Goals The objective of this project is to find out how pH affects the process of electrolysis. The experiment was performed to determine which pH level of an electrolyte (sulfuric…
CSEF · 2006
Chemistry
Objectives/Goals My goal was to see if the speed at which a salt melts ice is related to the salt's molecular structure. Methods/Materials I used three types of salt: Sodium chloride, Potass…
CSEF · 2006
Chemistry
Objectives/Goals This experiment was to determine if over-the-counter antacids were actually basic! The medicines chosen were name brand (no generics), original-strength products that listed…
CSEF · 2006
Chemistry
Objectives/Goals My goal with this project was to find out if adding color in a liquid form during fuming would enhance the visibility of latent prints using the Superglue or Cyanoacrylate F…
CSEF · 2006
Chemistry
Objectives/Goals The purpose of my experiment is to find the optimum temperature for absorbing CO2 in molecular sieve 4A. Methods/Materials I first heat up my column to the test temperature.…
CSEF · 2006
Chemistry
Objectives/Goals The purpose of this experiment was to find the effects of temperature and type of storage container on the concentration of dissolved carbon dioxide in soda. Methods/Materia…